New Room Layout

DIY Studio Stuff
Post Reply
User avatar
Lt. Bob
Posts: 7658
Joined: Wed Jan 04, 2017 3:02 pm

Re: New Room Layout

Post by Lt. Bob »

I'm at 29.03509 N so according to my understanding of it, both of ya'll are closer than moi
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

They built a Chernobyl containment unit over your house before working on it?
Rebel Yell
User avatar
WhiskeyJack
Site Admin
Posts: 13134
Joined: Sun Jan 12, 2014 11:48 pm
Location: Canada
Contact:

Re: New Room Layout

Post by WhiskeyJack »

JD01 wrote: ↑Wed May 14, 2025 6:45 pm
Tadpui wrote: ↑Wed May 14, 2025 1:57 pm So was this previously a flat roof and you're adding the gabled roof above that? Or did they demolish a gabled roof to add this on top?

That's great to have a new office and studio space. Is the climate in Wales such that you need air conditioning up there? Here in the midwest US, even 2-story houses get boiling hot upstairs in the summertime. It'd be even worse with a 3rd story, when all of the heat rises and settles in that top story.
I think me and Shan checked this once... I'm actually slightly further north than him! It gets a bit warm in the summer, our winters get a bit cold... and very wet.
Image

Image


Now that we've got that out of the way looks like your Reno is taking off man. I love watching shit unfold and progress that is so badass.
:happytrees:
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

Greg_L wrote: ↑Thu May 15, 2025 9:35 am They built a Chernobyl containment unit over your house before working on it?
Yeah man... you might have heard that it rains in Wales.
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

JD01 wrote: ↑Thu May 15, 2025 2:05 pm
Yeah man... you might have heard that it rains in Wales.
Is that standard construction practice? I've never seen that before. Here in the US something like that would add like 9 years to the timeline.
Rebel Yell
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

Greg_L wrote: ↑Thu May 15, 2025 2:54 pm
JD01 wrote: ↑Thu May 15, 2025 2:05 pm
Yeah man... you might have heard that it rains in Wales.
Is that standard construction practice? I've never seen that before. Here in the US something like that would add like 9 years to the timeline.
Yeah, if you're taking the roof off an occupied property, ir gets a temporary roof. I don't think there's a regulation that says it has to happen, but it's good practice
User avatar
vomitHatSteve
Posts: 8125
Joined: Tue Feb 14, 2017 11:06 am
Location: Undisclosed
Contact:

Re: New Room Layout

Post by vomitHatSteve »

JD01 wrote: ↑Thu May 15, 2025 3:08 pm
Greg_L wrote: ↑Thu May 15, 2025 2:54 pm

Is that standard construction practice? I've never seen that before. Here in the US something like that would add like 9 years to the timeline.
Yeah, if you're taking the roof off an occupied property, ir gets a temporary roof. I don't think there's a regulation that says it has to happen, but it's good practice
Does that change with the timeline of the project?

I see a lot folks getting roofs redone around here, but since they're 1-2 day jobs, they don't get any temporary shelter put up
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

Yeah a roof on an average house is done in a day.
Rebel Yell
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

vomitHatSteve wrote: ↑Thu May 15, 2025 7:18 pm
JD01 wrote: ↑Thu May 15, 2025 3:08 pm
Yeah, if you're taking the roof off an occupied property, ir gets a temporary roof. I don't think there's a regulation that says it has to happen, but it's good practice
Does that change with the timeline of the project?

I see a lot folks getting roofs redone around here, but since they're 1-2 day jobs, they don't get any temporary shelter put up
It took them two or three days to put the scaffolding up.
They're not just re-felting and tiling the roof though, they're completely rebuilding the roof to be a different shape and adding a block wall up there.
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

@Tadpui Has inspired me with his fancy room treatment. I want to start planning how I'm going to treat my awkwardly shaped room.
Refer back to the sketches at the start of the first page for the layout.

My desk will be at the end of the room by the chimney - this wall will likely just be plastered flat and I'll have a fitted desk in front of it. I'm gonna stick a square of room treatment on this wall in front of me.. using @WhiskeyJack's approach of vandalising an old band t-shirt to build into a the room treatment.

I'm guessing I'll need something on the flat wall which will be to my right, no idea what I'm going to do with the sloping wall to my left. I'll stick traps in the back corners.
User avatar
WhiskeyJack
Site Admin
Posts: 13134
Joined: Sun Jan 12, 2014 11:48 pm
Location: Canada
Contact:

Re: New Room Layout

Post by WhiskeyJack »

JD01 wrote: ↑Fri May 16, 2025 11:56 am @Tadpui Has inspired me with his fancy room treatment. I want to start planning how I'm going to treat my awkwardly shaped room.
Refer back to the sketches at the start of the first page for the layout.

My desk will be at the end of the room by the chimney - this wall will likely just be plastered flat and I'll have a fitted desk in front of it. I'm gonna stick a square of room treatment on this wall in front of me.. using @WhiskeyJack's approach of vandalising an old band t-shirt to build into a the room treatment.

I'm guessing I'll need something on the flat wall which will be to my right, no idea what I'm going to do with the sloping wall to my left. I'll stick traps in the back corners.
Nice buddy. They are pretty cool. Ive made some for other people actually and they love them. Not even as sound treatments just fat dad's thay don't fit their favorite shirts anymore.
:happytrees:
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

WhiskeyJack wrote: ↑Fri May 16, 2025 12:31 pm
JD01 wrote: ↑Fri May 16, 2025 11:56 am @Tadpui Has inspired me with his fancy room treatment. I want to start planning how I'm going to treat my awkwardly shaped room.
Refer back to the sketches at the start of the first page for the layout.

My desk will be at the end of the room by the chimney - this wall will likely just be plastered flat and I'll have a fitted desk in front of it. I'm gonna stick a square of room treatment on this wall in front of me.. using @WhiskeyJack's approach of vandalising an old band t-shirt to build into a the room treatment.

I'm guessing I'll need something on the flat wall which will be to my right, no idea what I'm going to do with the sloping wall to my left. I'll stick traps in the back corners.
Nice buddy. They are pretty cool. Ive made some for other people actually and they love them. Not even as sound treatments just fat dad's thay don't fit their favorite shirts anymore.
I've got an In Utereo tour T-shirt (he didn't get as far as the UK, he tried to top himself in Rome and then went home) that I don't wear anymore - I'd like to have this in front of my desk as its a plain white T-shirt with the In Utero angel and a load of tour dates on it. I've got a really cool DK shirt too that would look good. Where are the pics of yours so I can have a think about it.
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

Started putting the partitions in now so I can get an idea of how the room will feel.
20250523_143856.jpg
Its actually going to end up being 2.3m wide and 4.6m long. So, I've actually got more space than I anticipated which is good.

My desk will be at the far end of the room against what is currently the chimney, although that wall is going to end up flat and there'll be insulation in there so that I don't piss off the neighbours.

Guitars are going to be on a rack to the left of the desk, what's going to be really nice is building the desk into the space and actually sticking a a rack space for my interface in it and an amp shelf.
You do not have the required permissions to view the files attached to this post.
User avatar
WhiskeyJack
Site Admin
Posts: 13134
Joined: Sun Jan 12, 2014 11:48 pm
Location: Canada
Contact:

Re: New Room Layout

Post by WhiskeyJack »

JD01 wrote: ↑Fri May 23, 2025 11:39 am Started putting the partitions in now so I can get an idea of how the room will feel.

20250523_143856.jpg
Its actually going to end up being 2.3m wide and 4.6m long. So, I've actually got more space than I anticipated which is good.

My desk will be at the far end of the room against what is currently the chimney, although that wall is going to end up flat and there'll be insulation in there so that I don't piss off the neighbours.

Guitars are going to be on a rack to the left of the desk, what's going to be really nice is building the desk into the space and actually sticking a a rack space for my interface in it and an amp shelf.
HAve you considered putting in a decoupled false wall with 6+" of air gap between you and your neighbors? ?

I remember back eons ago in the infancy of my interest in all thing home audio and noise and stuff me and buddy from another band were talking about it and he found some sound science were the only true way to isolate sound transfer was to have a room built inside of room, decoupled and with a minimum of a 6 inch air gap between existing walls ceilings and floors. HE and his dad did exactly that (my brain has lost how they decoupled the room) and i am serious when i say you could stand outside that barn, and they could jamming inside at large club volumes and you wouldn't hear anything outside. Not even so much as a low end rumble.

But as soon as you opened those first two doors it was like hell escaping.

I am thinking if you can spare 6 inches (like a real 6 inches, not the 6 inches you have your wife gaslight into believing is 6 inches) it might be worth a shot while the skeleton of your new room is still exposed.


Other wise everything is looking awesome man!!! I can only imagine how excited you are for all this.

Which one of the loin fruits is moving into your old music room ?
:happytrees:
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

WhiskeyJack wrote: ↑Fri May 23, 2025 1:01 pm
JD01 wrote: ↑Fri May 23, 2025 11:39 am Started putting the partitions in now so I can get an idea of how the room will feel.

20250523_143856.jpg
Its actually going to end up being 2.3m wide and 4.6m long. So, I've actually got more space than I anticipated which is good.

My desk will be at the far end of the room against what is currently the chimney, although that wall is going to end up flat and there'll be insulation in there so that I don't piss off the neighbours.

Guitars are going to be on a rack to the left of the desk, what's going to be really nice is building the desk into the space and actually sticking a a rack space for my interface in it and an amp shelf.
HAve you considered putting in a decoupled false wall with 6+" of air gap between you and your neighbors? ?

I remember back eons ago in the infancy of my interest in all thing home audio and noise and stuff me and buddy from another band were talking about it and he found some sound science were the only true way to isolate sound transfer was to have a room built inside of room, decoupled and with a minimum of a 6 inch air gap between existing walls ceilings and floors. HE and his dad did exactly that (my brain has lost how they decoupled the room) and i am serious when i say you could stand outside that barn, and they could jamming inside at large club volumes and you wouldn't hear anything outside. Not even so much as a low end rumble.

But as soon as you opened those first two doors it was like hell escaping.

I am thinking if you can spare 6 inches (like a real 6 inches, not the 6 inches you have your wife gaslight into believing is 6 inches) it might be worth a shot while the skeleton of your new room is still exposed.


Other wise everything is looking awesome man!!! I can only imagine how excited you are for all this.

Which one of the loin fruits is moving into your old music room ?
Youngest is moving into my old room she needs a room of her own.
I can't spare 6 inches all around!
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

The most amazing bit is seeing white guys doing that type of work.
Rebel Yell
User avatar
JD01
Posts: 17233
Joined: Wed Jan 04, 2017 1:11 pm
Location: Wales, UK

Re: New Room Layout

Post by JD01 »

Greg_L wrote: ↑Mon May 26, 2025 11:32 am The most amazing bit is seeing white guys doing that type of work.
My builders seem like a good bunch actually. I'll get them beer and texas chicken towards the end of the job
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

JD01 wrote: ↑Mon May 26, 2025 11:37 am
My builders seem like a good bunch actually. I'll get them beer and texas chicken towards the end of the job
I've had everything from new roofing to foundation repair. Never once a White crew. Not that I care. No Blacks either. I'm just saying here in the US that type of work is done by immigrants...legal or not. We need them.
Rebel Yell
User avatar
Tadpui
Posts: 3689
Joined: Thu Jan 05, 2017 3:50 pm

Re: New Room Layout

Post by Tadpui »

Greg_L wrote: ↑Mon May 26, 2025 11:55 am I've had everything from new roofing to foundation repair. Never once a White crew. Not that I care. No Blacks either. I'm just saying here in the US that type of work is done by immigrants...legal or not. We need them.
Our house build was very unusual in that respect. The vast majority of the labor was white guys. Foundation and drywall were the only Mexican crews in the whole process. That's really surprising to me.

Looking at the demographics of our county, I guess it isn't totally surprising. It's something like 92% Caucasian as of the latest census. Like, if our county was a person, it would listen to Dave Matthews Band. It's really white. Almost suspiciously white.
User avatar
Greg_L
Posts: 22394
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: New Room Layout

Post by Greg_L »

Tadpui wrote: ↑Mon May 26, 2025 12:24 pm

Our house build was very unusual in that respect. The vast majority of the labor was white guys. Foundation and drywall were the only Mexican crews in the whole process. That's really surprising to me.

Looking at the demographics of our county, I guess it isn't totally surprising. It's something like 92% Caucasian as of the latest census. Like, if our county was a person, it would listen to Dave Matthews Band. It's really white. Almost suspiciously white.
:lollers2: :lollers2:

Yeah here in Texas it would be a shock to the system to find a white or black murrcan doing construction of any type. They may run a crew, but they're not out there swinging hammers. The actual work is all done by some types of latino hispanic.
Rebel Yell
Post Reply